SH/T3516-2012催化裂化装置轴流压缩机-烟气轮机能量回收机组施工及验收规范（英文版）

11.6 Mechanical Running Test of Expander

11.3 Mechanical Running Test of the Motor and Generator

11.1 Preparations for Running Test

11 Running Test of the Machine Train

10.1 Auxiliary Facility Installation

10 Auxiliary Facility and Piping Installation

9 Assembly of Motor/Generator

8.2 Assembly of Expander

8.1 Examination Prior to Expander Assembly

8 Assembly and Examination of Expander

7.2 Axial Compressor with Bearing House and Casing Separated

7.1 Assembling Procedure

7 Axial Compressor Assembly

6 Gearbox Assembly

5.4 Shaft End-to-end Distance Confirmation and Shaft Alignment

5 Overall Installation of the Machine Train

4.4 Foundation Inspection，Re-measurement and Surface Treatment

4.3 Unpacking Inspection

4.2 Site Preparations

4.1 Technical Preparations

4 Preparations for Construction

3.2 Basic Requirements for the Machine Train Construction

3 General Provisions

1 Scope

Revision Explanation

Explanation of Provisions

Explanation of Wording in This Code

B.3 Determination of Support Adjusting Quantity by Means of Calculation Method

B.2 Determination of Support Adjusting Quantity by Means of Graphing Method

B.1 Basic Procedures of Mono-indicator Alignment

Appendix B（Informative）Mono-indicator Alignment

Appendix A（Informative）Technical Characteristics of the Machine Train

12 Technical Documents of Construction Completion

11.6 Mechanical Running Test of Expander

11.5 Mechanical Running Test of Axial Compressor

11.4 Mechanical Running Test of Gearbox

11.3 Mechanical Running Test of the Motor and Generator

11.2 Running Test of Oil System

11.1 Preparations for Running Test

11 Running Test of the Machine Train

10.3 Oil System Flushing

10.2 Piping Connection

10.1 Auxiliary Facility Installation

10 Auxiliary Facility and Piping Installation

9 Assembly of Motor/Generator

8.2 Assembly of Expander

8.1 Examination Prior to Expander Assembly

8 Assembly and Examination of Expander

7.3 Axial Compressor with Bearing House and Casing Integrated

7.2 Axial Compressor with Bearing House and Casing Separated

7.1 Assembling Procedure

7 Axial Compressor Assembly

6 Gearbox Assembly

5.6 Coupling Assembly

5.5 The Machine Train Grouting

5.4 Shaft End-to-end Distance Confirmation and Shaft Alignment

5.3 Installation of the Machine Train in Position

5.2 Installation of Baseplate in Position

5.1 Installation of Supporting Plates and Shims

5 Overall Installation of the Machine Train

4.4 Foundation Inspection，Re-measurement and Surface Treatment

4.3 Unpacking Inspection

4.2 Site Preparations

4.1 Technical Preparations

4 Preparations for Construction

3.2 Basic Requirements for the Machine Train Construction

3.1 General Requirements

3 General Provisions

2 Normative References

1 Scope

Foreword

中华人民共和国住房和城乡建设部公告

版权信息

封面

封面

版权信息

中华人民共和国住房和城乡建设部公告

Foreword

1 Scope

2 Normative References

3 General Provisions

3.1 General Requirements

3.2 Basic Requirements for the Machine Train Construction

4 Preparations for Construction

4.1 Technical Preparations

4.2 Site Preparations

4.3 Unpacking Inspection

4.4 Foundation Inspection，Re-measurement and Surface Treatment

5 Overall Installation of the Machine Train

5.1 Installation of Supporting Plates and Shims

5.2 Installation of Baseplate in Position

5.3 Installation of the Machine Train in Position

5.4 Shaft End-to-end Distance Confirmation and Shaft Alignment

5.5 The Machine Train Grouting

5.6 Coupling Assembly

6 Gearbox Assembly

7 Axial Compressor Assembly

7.1 Assembling Procedure

7.2 Axial Compressor with Bearing House and Casing Separated

7.3 Axial Compressor with Bearing House and Casing Integrated

8 Assembly and Examination of Expander

8.1 Examination Prior to Expander Assembly

8.2 Assembly of Expander

9 Assembly of Motor/Generator

10 Auxiliary Facility and Piping Installation

10.1 Auxiliary Facility Installation

10.2 Piping Connection

10.3 Oil System Flushing

11 Running Test of the Machine Train

11.1 Preparations for Running Test

11.2 Running Test of Oil System

11.3 Mechanical Running Test of the Motor and Generator

11.4 Mechanical Running Test of Gearbox

11.5 Mechanical Running Test of Axial Compressor

11.6 Mechanical Running Test of Expander

12 Technical Documents of Construction Completion

Appendix A（Informative）Technical Characteristics of the Machine Train

Appendix B（Informative）Mono-indicator Alignment

B.1 Basic Procedures of Mono-indicator Alignment

B.2 Determination of Support Adjusting Quantity by Means of Graphing Method

B.3 Determination of Support Adjusting Quantity by Means of Calculation Method

Explanation of Wording in This Code

Explanation of Provisions

Revision Explanation

1 Scope

3 General Provisions

3.2 Basic Requirements for the Machine Train Construction

4 Preparations for Construction

4.1 Technical Preparations

4.2 Site Preparations

4.3 Unpacking Inspection

4.4 Foundation Inspection，Re-measurement and Surface Treatment

5 Overall Installation of the Machine Train

5.4 Shaft End-to-end Distance Confirmation and Shaft Alignment

6 Gearbox Assembly

7 Axial Compressor Assembly

7.1 Assembling Procedure

7.2 Axial Compressor with Bearing House and Casing Separated

8 Assembly and Examination of Expander

8.1 Examination Prior to Expander Assembly

8.2 Assembly of Expander

9 Assembly of Motor/Generator

10 Auxiliary Facility and Piping Installation

10.1 Auxiliary Facility Installation

11 Running Test of the Machine Train

11.1 Preparations for Running Test

11.3 Mechanical Running Test of the Motor and Generator

11.6 Mechanical Running Test of Expander