4.3　Anchor Bolt

Ⅰ　Major Item

4.3.1　Specification and fastening of anchor bolts must meet the requirements of design technical documents.

Quantity checked:20% selective examination，and no less than 4.

Checking method:Check quality certification documents and ruler measurement.Check fastening records.Check by hammering nuts tests.

Ⅱ　General Items

4.3.2　Greasy dirt，oxide skin，etc.on anchor bolts shall be cleaned.Screw threads shall paint oil of appropriate amount.

Quantity checked:All.

Checking method:Check by observation.

4.3.3　Anchor bolts in preformed holes shall be vertical.The distance from any part of a bolt to the wall of hole shall be larger than 15mm.Bolts shall not touch the bottom of holes.

Quantity checked:All.

Checking method:Check by observation.